Assembly video – 1 leaf
RECESS MOUNTING
The dimensions provided when ordering must exactly match the measurements taken from your opening.
To ensure a perfectly fitted mosquito net, we recommend taking measurements at several points:
• Width: Take dimensions W1, W2 and W3
• Height: Take dimensions H1, H2 and H3
✅ It is imperative to note the smallest measurement for both width and height.
The dimensions confirmed during your order directly correspond to the custom manufacturing dimensions of your mosquito net.
⚠️ No additional automatic deduction is made by the factory.
We therefore recommend carefully checking your measurements before confirming your order.
If in doubt, you can also send us photos of your opening and your dimensions so that we can check compatibility and guide you to the appropriate model.
- Check your measurements before confirming the order.
- No further automatic withdrawal is performed by the factory.
- If in doubt, photos of your opening can be sent to us with your dimensions.
NO-DRILL MODEL INSTALLATION
Measuring Guide — No-Drill Model
📏 Take measurements directly from gasket to gasket, inside the window frame.
➡️ Width = interior horizontal measurement
➡️ Height = interior vertical measurement
⚠️ Important: the window frame must be perfectly smooth to allow for the no-drill model installation.
Compatibility requirements:
— No ridges, grooves, or bumps on the frame
— Flat surface all around
— Regular and continuous gasket
If in doubt, you can send us photos of your open window and the gaskets so we can check the compatibility of the no-drill model.
- Measure in millimeters (mm)
- Provide the exact dimensions
- Do not add or remove anything from the measurements taken